How can you fix ylod on ps3

Like in the photos, unclip the 3 brackets holding the rear panel to the internal frame of your PS3. Do not hesitate to lever it up with a spudger to remove it. Do step 46 again, applying a few drops of ArctiClean 1 solution on the second processor graphics. Heat the chips for seconds each with a heat gun on low power, or a hair dryer for around 1 minute. Using the plastic card provided in our YLOD kit , delicately spread the thermal paste across the processor.

Using the nylon spudger carefully peel the protective films off the thermal pads blue in colour. Our goal is to make repairing accessible to all. Our team introduces you Captain Repair, an on-site repair service. The good point about it is that you can have the repair done at home, at work or at a coffee shop! All rights reserved to SOSav. Why not you? Any issues with the PS3 are shown with this yellow light being lit when turning on the console, followed by a flashing red light that shows the PS3 won't restart.

This problem is generally caused by the PS3 overheating internally and melting the solder. This guide provides the solution to the YLOD. This solution is nowhere near perfect, but is one of the best repairs available! Do you have the spare parts to do the repair? Some parts are missing! Recommended repair kit. See product Add to cart.

Required spare parts. Required tools. Nylon Spudger. Guide format : Pdf Integrate. See in HD. Lift off the small silicone cover to release the screw that's holding the smart plate in place. Step 2 Use a torx screwdriver to unscrew the screw that was underneath the silicone cover just removed.

This screw, circled in red in the photo, secures the smart plate on your PS3. Step 3 Delicately push the smart plate cover down towards the bottom of the console.

The yellow light of death. The light is only yellow for a brief moment. Description [ ] For a typical case of a YLoD, is caused by a motherboard failure, the following happens when you touch the power button: 1. The green and or blue lights come on for around 1. The fan and blue light turn off and the green light turns yellow for about a half-second.

The PS3 beeps 3 times and the yellow light turns blinking red. The light will remain blinking red until you touch the power button again, returning the console to a steady red standby light or you can hit the main power switch.

First-Person Shooters. Gaming PCs. Strategy Games. Technical How-Tos. Horror Games. Sports Games. Fighting Games. Classic Games.

Puzzle Games. Welcome to LevelSkip. Related Articles. By Kyler J Falk. By Vince Tangcalagan. By Carlyn Hayes. By sigbog. The console has been Reset Glitch Hacked which turns it into a fully Please select this option if the fault you have with your console is not This superb modifications turns your console into a Jtag console. Power LED lights green at switch on 2. Power LED turns Yellow 3.

There are three beeps 4. Read reviews Rate it. Quantity The minimum purchase order quantity for the product is 1. By Jason C. It was bad news unfortunately Sent my original pride and joy PS3 for a repair after it got the dreaded ylod. By Chris S.

From dead to silent running The team went above and beyond.